Part Number Reference For Pins/Terminals/Tools/etc

More
2 years 7 months ago - 2 years 7 months ago #1236 by Mark
Replied by Mark on topic Part Number Reference For Pins/Terminals/Tools/etc
Alignment pin - BACC47EM1
  
  
 
  
  
 
  
   
 
  
  
Please reference here for card replacement forum entry.
Last edit: 2 years 7 months ago by Mark.

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #1360 by Mark
Replied by Mark on topic Part Number Reference For Pins/Terminals/Tools/etc
www.astrotool.com/product-category/tooli...h-connectors/page/2/
 
 
 
 

Please Log in or Create an account to join the conversation.

More
10 months 1 week ago #1743 by Mark
Replied by Mark on topic Part Number Reference For Pins/Terminals/Tools/etc
I found a riveted on ground block which I've never dealt with before.
  
  
 
  
  
Some info on part numbers and pins.....
  
  
 
  
   
 
  
  
 
  
  
 
  
 

Please Log in or Create an account to join the conversation.

More
10 months 1 week ago #1746 by Mark
Replied by Mark on topic Part Number Reference For Pins/Terminals/Tools/etc
For the post above on the riveted terminal block......

The red pins are "not" used for the block part number listed above.

They are a smaller diameter. 

The blue pins are correct.
  
  
 
  
 

Please Log in or Create an account to join the conversation.

More
10 months 6 days ago - 10 months 6 days ago #1748 by Mark
Replied by Mark on topic Part Number Reference For Pins/Terminals/Tools/etc
 Fire Loop Heat Shrink
  
  
  
  
  
 
Last edit: 10 months 6 days ago by Mark.

Please Log in or Create an account to join the conversation.

Time to create page: 0.765 seconds