Fire Loop Heat Shrink
  
     
  

For the post above on the riveted terminal block......

The red pins are "not" used for the block part number listed above.

They are a smaller diameter. 

The blue pins are correct.
  
     
 

I found a riveted on ground block which I've never dealt with before.
  
     
  
Some info on part numbers and pins.....
  
     
      
     
     
 

12 wires total. The pins called out are "only" for the plug on the right.

The other side of the wire group goes to different type plugs (which might have different pins).

Those pins must be identified in the Standard Wiring Practices Manual.

I see three jacks and the left and one plug. I know they don't use the same pins.

They could be male or female. Larger or smaller diameter.....

This post:  Pins/Splices/Terminals     Might help you out.


Direct Link:  rotate.aero/images/Basics/Tools_Pins_Sockets_Term.pdf


 

www.astrotool.com/product-category/tooli...h-connectors/page/2/
 
 

Alignment pin - BACC47EM1
  
   Please reference here for card replacement forum entry.

Card plug and tooling.....
  
     
  
Plug - BACC65L66A
Pins -300052-006
Tool - CEIT22

Clip Nuts and Screws For Flange Mount Plugs
  
     

    
     
  

Regular Heat Shrink Part Numbers
  
    

Black/White High Temp Tie-Cord

BMS13-54HGDTIIIC1FC110/14WH
  
     
     
 

Red and Green Tie-Cord 
  
     
     

Clear high-temp heat shrink....
  
     
  

Yoke Microphone Switches    
  
                   

Orange in-line splices and pins.

Splice P/N  TSE-20-01 ( Reference )

Pin P/N 1841-1-5620 ( Reference )